Home / Building Codes / Virginia / Mathews County

Mathews County, Virginia Building Codes

Updated : 04/22/2024

Overview

Mathews County, VA adopts the Virginia Uniform Statewide Building Code (VUSBC) (based upon the ICC body of codes). Mathews County, VA Muni. Code § 20-1.

Effective 09/04/2018, the state of Virginia adopted the following codes:

Helpful resources for Mathews County, Virginia include the following.

Residential Building Code

Virginia adopted a statewide mandatory residential code that will control. Authority for local amendments will be limited.See PLRB, Virginia Building Codes for more information on state level codes.

Mathews County adopted the 2015 Virginia Residential CodeYou can find a copy of the code here.You can find information about amendments to the model code here.

Auto Search - beta:

2015 Virginia Residential Code (2015 IRC)(Mathews County , VA § 20-1 Scope.)

...These rules and regulations governing administration and enforcement shall apply to the Virginia Uniform Statewide Building Code and any future amendments to this code...

Drip Edge

Drip Edge: no

Ice Barrier

Are ice barriers required for Mathews County ? No
Comments:

Local Design Criteria

TABLE R301.2(1)

CLIMATIC AND GEOGRAPHIC DESIGN CRITERIA

 

 Ground Snow Load

 20 PSF

 Wind Design

 Speed, V (ult) = 115 MPH

 Topographical Effects = Yes

 Frost Line Depth

 16 inches

 Seismic Design Category

 A

 Subject to Damage from

 Weathering = moderate to severe

 Termite = moderate to heavy

 Winter Design Temperate

 22

 Ice Barrier Required

 No

 Flood Hazard Areas

 Yes (A; AE; Coastal A; VE)

 Initial FIS & FIRM = 02-04-1987

 Current-Effective FIS & FIRM = 12-09-2014

 Community Number = 510096

 FIRM Panel Index = 51115CINDOB

 Air Freezing Index

 128

 Annual Mean temp.

 59.1

 Climate Zone

 4-A

Comments

Mathews County, VA adopts the Virginia Uniform Statewide Building Code (VUSBC) (based upon the ICC body of codes). Mathews County, VA Muni. Code § 20-1.

Effective 09/04/2018, the state of Virginia adopted the 2015 Virginia Residential Code.

Existing Buildings

Existing buildings, meaning buildings that were built in accordance to code at the time of construction, typically merit extra consideration in a current updated code.

Mathews County, VA adopts the Virginia Uniform Statewide Building Code (VUSBC) (based upon the ICC body of codes). Mathews County, VA Muni. Code § 20-1.

Effective 09/04/2018, the state of  Virginia adopted the 2015 Virginia Existing Building Code (VEBC), with amendments (based upon the 2015 IEBC).

Chapter 11 of the 2015 VEBC provides retrofit regulations.

Appendix J of the 2015 IRC was not included in the 2015 VRC.

Commercial Building Code

Mathews County adopted the 2015 Virginia Construction CodeYou can find a copy of the code here.You can find information about amendments to the model code here.

Auto Search - beta:

. 2015 Virginia Construction Code (2015 IBC)(Mathews County , VA Municipal Code)

...Adoption not found...

Comments

Mathews County, VA adopts the Virginia Uniform Statewide Building Code (VUSBC) (based upon the ICC body of codes). Mathews County, VA Muni. Code § 20-1.

Effective 09/04/2018, the state of Virginia adopted the 2015 Virginia Construction Code.

Existing Buildings

Mathews County, VA adopts the Virginia Uniform Statewide Building Code (VUSBC) (based upon the ICC body of codes). Mathews County, VA Muni. Code § 20-1.

Effective 09/04/2018, the state of  Virginia adopted the 2015 Virginia Existing Building Code (VEBC), with amendments (based upon the 2015 IEBC).

Chapter 11 of the 2015 VEBC provides retrofit regulations.

Other Building Codes

Mathews County, VA has also adopted the following codes (included in the 2015 VCC): 

Mathews County, VA Muni. Code § 20-1.