Home / Building Codes / Texas / Farmers Branch

Farmers Branch, Texas Building Codes

Updated : 04/22/2024

Overview

Farmers Branch, Texas, adopted the 2018 International Residential Code (IRC), including Appendix P, with amendments. Farmers Branch, TX, Muni. Code § 22-100 (adoption) and § 22-101 (amendments). Farmers Branch, Texas, adopted the 2018 International Building Code (IBC), including Appendices E, F, G, and J, with amendments. Farmers Branch, TX, Muni. Code § 22-86 (adoption) and § 22-87 (amendments). No adoption of the 2018 IEBC was found in the municipal code or city ordinance and section 101.4.7 is amended in the 2018 IBC. 

Helpful resources for Farmers Branch, Texas include the following.

Residential Building Code

Texas adopted a model state residential code but it is not in force unless adopted locally.See PLRB, Texas Building Codes for more information on state level codes.

Farmers Branch adopted the 2018 IRC, locally. Note that adoptions usually come with amendments. So, it is important to review those amendments in addition to the unamended model code.

You can find a copy of the model code here.

You can find information about amendments to the model code here.

Auto Search - beta:

2018 IRC(Farmers Branch, TX Sec. 22-100. - Adoption of International Residential Conservation Code; purpose.)

...The 2018 Edition of the International Residential Code (inclusive of Appendix P "Sizing of Water Piping System" as published by the International Code Council and as amended pursuant to section 22-101, is hereby adopted. Copies of the Residential Code are on file in the office of the city secretary for permanent record and inspection and are incorporated...

Drip Edge

Drip Edge: yes

Ice Barrier

Are ice barriers required for Farmers Branch ? No
Citation: Farmers Branch, TX, Municipal Code Sec. 22-101
Comments:

The adoption of the residential code included an amendment stating that ice barrier underlayment is not required at the eaves. 

Ground Snow Load Wind Speed (mph) Topographic Effects Special Wind Region Wind-borne Debris Zone Seismic Design Category Damage from Weathering
5 lb/ft² 115 (3 sec-gust)/76 fastest mile No No No A Moderate

 

Damange from Frost Line Depth Damage from Termite Winter Design Temp Ice Barrier Underlayment Required Flood Hazards Air Freezing Index Mean Annual Temp
6" Very Heavy 22ºF No Local Code 150 64.9ºF

 Farmers Branch, TX, Muni. Code § 22-100 (adoption) and § 22-101 (amendments). 

Comments

Farmers Branch, Texas, adopted the 2018 International Residential Code (IRC), including Appendix P, with amendments. Farmers Branch, TX, Muni. Code § 22-100 (adoption) and § 22-101 (amendments). 

The city also amended “Section R902 Roof covering materials” of the 2015 IRC, as follows:

R902.1 Roof covering materials. Roofs shall be covered with materials as set forth in Sections R904 and R905. Class A, B or C roofing shall be installed on all structures. Classes A, B and C roofing required by this section to be listed shall be tested in accordance with UIL 790 or ASTM E 108.

EXCEPTIONS:

5. Non-classified roof coverings shall be permitted on one-story detached accessory structures used as tool and storage sheds, playhouses and similar uses, provided the floor area does not exceed (area defined by jurisdiction).

Farmers Branch, TX, Muni. Code § 22-101.

Existing Buildings

Existing buildings, meaning buildings that were built in accordance to code at the time of construction, typically merit extra consideration in a current updated code.

No adoption of the 2018 IEBC was found in the municipal code or city ordinance and section 101.4.7 is amended in the 2018 IBC. 

Commercial Building Code

Farmers Branch adopted the 2018 IBC, locally. Note that adoptions usually come with amendments. So, it is important to review those amendments in addition to the unamended model code.

You can find a copy of the code here.You can find information about amendments to the model code here.

Auto Search - beta:

See Muni. Code(Farmers Branch, TX Municipal Code)

...Adoption not found...

Comments

Farmers Branch, Texas, adopted the 2018 International Building Code (IBC), including Appendices E, F, G, and J, with amendments. Farmers Branch, TX, Muni. Code § 22-86 (adoption) and § 22-87 (amendments). 

Existing Buildings

No adoption of the 2018 IEBC was found in the municipal code or city ordinance and section 101.4.7 is amended in the 2018 IBC. 

Other Building Codes

Farmers Branch, Texas, adopted the 2020 National Electrical Code (NEC) with amendments. Farmers Branch, TX, Muni. Code § 22-121 (adoption) and § 22-122 (amendments). 

Farmers Branch, Texas, adopted the 2018 International Energy Conservation Code (IECC) with amendments. Farmers Branch, TX, Muni. Code § 22-240 (adoption) and § 22-241 (amendments). 

Farmers Branch, Texas, adopted the 2018 International Fire Code (IFC) with amendments. Farmers Branch, TX, Muni. Code § 38-36 (adoption) and § 38-38 (amendments). 

Farmers Branch, Texas, adopted the 2018 International Fuel Gas Code (IFGC) with amendments. Farmers Branch, TX, Muni. Code § 22-230 (adoption) and § 22-231 (amendments). 

Farmers Branch, Texas, adopted the 2018 International Mechanical Code (IMC) with amendments. Farmers Branch, TX, Muni. Code § 22-191 (adoption) and § 22-192 (amendments). 

Farmers Branch, Texas, adopted the 2018 International Plumbing Code (IPC) with amendments. Farmers Branch, TX, Muni. Code § 22-226 (adoption) and § 22-227 (amendments). 

Farmers Branch, Texas, adopted the 2018 International Swimming Pool and Spa Code (ISPSC) with amendments. Farmers Branch, TX, Muni. Code § 22-156 (adoption) and § 22-157 (amendments).