Home / Building Codes / Texas / Benbrook

Benbrook, Texas Building Codes

Updated : 04/22/2024

Overview

Benbrook, Texas, adopted the 2018 International Residential Code (IRC). Benbrook, TX, Muni. Code § 15.06.010 (adoption) and Benbrook, TX, Exibit B International Residential Code Amendments, 1437 Ordinance No. 2018-12 (2018). Benbrook, Texas, adopted the 2018 International Building Code (IBC). Benbrook, TX, Muni. Code § 15.04.010 (adoption) and Benbrook, TX, Exibit A International Building Code Amendments, 1446 Ordinance No. 2019-01 (2019). Benbrook, Texas, adopted the 2018 International Existing Building Code (IEBC). Benbrook, TX, Muni. Code § 15.27.010 (adoption) and Benbrook, TX, Exibit I International Existing Building Code Amendments, 1444 Ordinance No. 2019-01 (2019). 

Helpful resources for Benbrook, Texas include the following.

Residential Building Code

Texas adopted a model state residential code but it is not in force unless adopted locally.See PLRB, Texas Building Codes for more information on state level codes.

Benbrook adopted the 2018 IRC, locally. Note that adoptions usually come with amendments. So, it is important to review those amendments in addition to the unamended model code.

You can find a copy of the model code here.

You can find information about amendments to the model code here.

Auto Search - beta:

2018 IRC(Benbrook, TX 15.06.010 - Adopted.)

...The International Residential Code, 2018 Edition, published by the International Code Council, is adopted as the official residential code of the city. The code is adopted by reference in the ordinance codified in this chapter and is fully incorporated by reference as though copied in its entirety herein. (Ord...

Drip Edge

Drip Edge: yes

Ice Barrier

Are ice barriers required for Benbrook ? No
Citation: Benbrook Municipal Code § 15.06.020, Exhibit B
Comments:

The adoption of the residential code included an amendment stating that ice barrier underlayment is not required at the eaves

Ground Snow Load Wind Speed (mph) Topographic Effects Special Wind Region Wind-borne Debris Zone Seismic Design Category Damage from Weathering
 5 lb/ft 115 (3 sec-gust)/76 fastest mile No No No A Moderate
Damange from Frost Line Depth Damage from Termite Winter Design Temp Ice Barrier Underlayment Required Flood Hazards Air Freezing Index Mean Annual Temp
6" Very Heavy 22ºF No Local Code 150 64.9ºF

 

Benbrook, TX, Exibit B International Residential Code Amendments, 1437 Ordinance No. 2018-12 (2018). 

Comments

Benbrook, Texas, adopted the 2018 International Residential Code (IRC). Benbrook, TX, Muni. Code § 15.06.010 (adoption) and Benbrook, TX, Exibit B International Residential Code Amendments, 1437 Ordinance No. 2018-12 (2018). 

The city amended some provisions for roofing in Benbrook Municipal Code, Exhibit B:

Section R902.1; Amend and add exception #4 to read as follows:

R902.1 Roofing covering materials. Roofs shall be covered with materials as set forth in Sections R904 and R905. Class A, B or C roofing shall be installed. {remainder unchanged}

      Exceptions:

  1. {text unchanged}
  2. {text unchanged}
  3. {text unchanged}
  4. Non-classified roof coverings shall be permitted on one-story detached accessory structures used as tool and storage sheds, playhouses and similar uses, provided the floor area does not exceed (area defined by jurisdiction).

Existing Buildings

Existing buildings, meaning buildings that were built in accordance to code at the time of construction, typically merit extra consideration in a current updated code.

Benbrook, Texas, adopted the 2018 International Existing Building Code (IEBC). Benbrook, TX, Muni. Code § 15.27.010 (adoption) and Benbrook, TX, Exibit I International Existing Building Code Amendments, 1444 Ordinance No. 2019-01 (2019). 

 

Commercial Building Code

Benbrook adopted the 2018 IBC, locally. Note that adoptions usually come with amendments. So, it is important to review those amendments in addition to the unamended model code.

You can find a copy of the code here.You can find information about amendments to the model code here.

Auto Search - beta:

See Muni. Code(Benbrook, TX Municipal Code)

...Adoption not found...

Comments

Benbrook, Texas, adopted the 2018 International Building Code (IBC). Benbrook, TX, Muni. Code § 15.04.010 (adoption) and Benbrook, TX, Exibit A International Building Code Amendments, 1446 Ordinance No. 2019-01 (2019). 

The city amended some provisions for roofing in Exhibit A:

Table 1505.1; delete footnote c and replaced footnote b with the following:

b. Non-classified roof coverings shall be permitted on buildings of U occupancies having not more than 120 sq. ft. of protected roof area. When exceeding 120 sq. ft. of protected roof area, buildings of U occupancies may use non-rated non-combustible roof coverings.

c. {Delete}  

     Section 1505.7; delete the section

     Section 1510.1; add a sentence to read as follows:

1510.1 General. Materials and methods of applications used for recovering or replacing an existing roof covering shall comply with the requirements of Chapter 15. All individual replacement shingles or shakes shall be in compliance with the rating required by Table 1505.1.

{Text of exception unchanged}

Existing Buildings

Benbrook, Texas, adopted the 2018 International Existing Building Code (IEBC). Benbrook, TX, Muni. Code § 15.27.010 (adoption) and Benbrook, TX, Exibit I International Existing Building Code Amendments, 1444 Ordinance No. 2019-01 (2019). 

Other Building Codes

Benbrook, Texas, adopted the 2018 International Property Maintenance Code (IPMC). Benbrook, TX, Muni. Code § 15.60.010 (adoption) and  Benbrook, TX, Amending International Property Maintenance Code, 1469 Ordinance No, 2021-07 (2021). 

Benbrook, Texas, adopted the 2018 International Energy Conservation Code (IECC). Benbrook, TX, Muni. Code § 15.10.010 (adoption) and Benbrook, TX, Exibit C Interntional Energy Conservation Code, 1437 Ordinance No. 2018-12 (2018). 

Benbrook, Texas, adopted the 2018 International Plumbing Code (IPC). Benbrook, TX, Muni. Code § 15.12.010 (adoption) and Benbrook, TX, Exibit D Interntional Plumbing Code, 1437 Ordinance No. 2018-12 (2018). 

Benbrook, Texas, adopted the 2018 International Fuel Gas Code (IFGC). Benbrook, TX, Muni. Code § 15.14.010 (adoption) and Benbrook, TX, Exibit E Interntional Fuel Gas Code, 1437 Ordinance No. 2018-12 (2018). 

Benbrook, Texas, adopted the 2018 International Fire Code (IFC). Benbrook, TX, Muni. Code § 15.16.010 (adoption) and Benbrook, TX, Exibit F Interntional Fire Code, 1437 Ordinance No. 2018-12 (2018). 

Benbrook, Texas, adopted the 2018 International Mechanical Code (IMC). Benbrook, TX, Muni. Code § 15.24.010 (adoption) and Benbrook, TX, Exibit G Interntional Mechanical Code, 1437 Ordinance No. 2018-12 (2018). 

Benbrook, Texas, adopted the 2018 International Swimming Pool and Spa Code (ISPSC). Benbrook, TX, Muni. Code § 15.26.010 (adoption) and Benbrook, TX, Exibit H Interntional Swimming Pool and Spa Code, 1444 Ordinance No. 2019-6 (2019). 

Benbrook, Texas, adopted the 2017 National Electrical Code (NEC). Benbrook, TX, Muni. Code § 15.08.010 (adoption) and Benbrook, TX, Exibit C National Electrical Code Amendments, 1419 Ordinance No. 2017-12 (2017).