Updated : 11/14/2024
Overview
Baneberry, Tennessee, adopted the 2018 International Residential Code (IRC), including Appendices B, C, F, N, and P. Baneberry, TN, Muni. Code § 12-101 (adoption)(see page 124), § 12-102 (amendments)(see page 125-129), and § 12-205 (see page 135). Baneberry, Tennessee, adopted the 2018 International Building Code (IBC). Baneberry, TN, Muni. Code § 12-205 (see page 135). For Baneberry, Tennessee, no local adoptions and no local amendments of an existing building code were located, therefore section 101.4.7 of the IBC would apply.
State regulations may not permit the adoption of a code less stringent than the codes adopted by the state. For the most accurate information please check with the local building department. See the Tennessee state overview.
Helpful resources for Baneberry, Tennessee include the following.
Residential Building Code
Tennessee adopted a statewide mandatory residential code that will control; however, local governments are free to make laws more strict (with some limitations).See PLRB,
Tennessee Building Codes for more information on state level codes.
Baneberry adopted the 2018 IRC, locally. Note that adoptions usually come with amendments. So, it is important to review those amendments in addition to the unamended model code.
You can find a copy of the model code here.
You can find information about amendments to the model code
here.
Auto Search - beta:
Drip Edge
Drip Edge: Yes
The IRC requires drip edge flashing in section R905.2.8.5 and the state legislature did not amend this section. TN ADC 0780-02-23-.02(1)(a).
Ice Barrier
Are ice barriers required for Baneberry ? No
Citation: Ordinance No. 215-14
Municipal Code
https://cityofbaneberry.com/municipal-code/#page=126Comments:
Table R301.2 (1) Climatic and Geographic Design Criteria.
Insert “10PSF” in the Ground Snow Load.
Insert “90” in the table for Wind Speed.
Insert “NO” in the table for Topographic effects.
Insert “C” in the table for Seismic Design Category.
Insert “Severe” in the table for Weathering.
Insert “12 inches” in the table for Frost Line Depth.
Insert “Moderate to Heavy” in the table for Termite.
Insert “19 degrees Fahrenheit” in the table for Winter Design Temp.
Insert “NO” in the table for Ice Barrier Underlayment Required.
Insert “210” in the table for the Air Freezing Index.
Insert “59.4” in the table for Mean Annual Temp.
Flood hazard areas shall be as determined be the FEMA Maps
Baneberry, TN, Muni. Code § 12-102 (amendments)(see page 126).
Government Officials
Last Name |
First Name |
Title |
E-mail |
Phone |
Note |
Jones |
Tom |
Building Official |
|
865-475-9071 |
|
Comments
Baneberry, Tennessee, adopted the 2018 International Residential Code (IRC), including Appendices B, C, F, N, and P. Baneberry, TN, Muni. Code § 12-101 (adoption)(see page 124), § 12-102 (amendments)(see page 125-129), and § 12-205 (see page 135).
State regulations may not permit the adoption of a code less stringent than the codes adopted by the state. For the most accurate information please check with the local building department. See the Tennessee state overview.
Existing Buildings
Existing buildings, meaning buildings that were built in accordance to code at the time of
construction, typically merit extra consideration in a current updated code.
Baneberry, Tennessee, adopted the 2018 IRC including Appendix J. Baneberry, TN, Muni. Code § 12-101 (adoption)(see page 124)
For Baneberry, Tennessee, no local adoptions and no local amendments of an existing building code were located, therefore section 101.4.7 of the IBC would apply.
Commercial Building Code
Baneberry adopted the 2018 IBC, locally. Note that adoptions usually come with amendments. So, it is important to review those amendments in addition to the unamended model code.
You can find a copy of the code
here.You can find information about amendments to the model code
here.
Auto Search - beta:
Comments
Baneberry, Tennessee, adopted the 2018 International Building Code (IBC). Baneberry, TN, Muni. Code § 12-205 (see page 135).
State regulations may not permit the adoption of a code less stringent than the codes adopted by the state. For the most accurate information please check with the local building department. See the Tennessee state overview.
Existing Buildings
For Baneberry, Tennessee, no local adoptions and no local amendments of an existing building code were located, therefore section 101.4.7 of the IBC would apply.