Oak Ridge, Tennessee Building Codes

Updated : 04/22/2024

Overview

Oak Ridge, TN has adopted the 2012 International Codes, with amendments, including the 2012 IRC (for One and Two Family Dwellings) and IBC. Oak Ridge, TN Muni. Codes § 12-1101 (IRC adoption), § 12-1102 (IRC amendments), § 12-201 (IBC adoption) and § 12-202 (IBC amendments).

State regulations may not permit the adoption of a code less stringent than the codes adopted by the state. For the most accurate information please check with the local building department. See the Tennessee state overview. Link to Tennessee Building Codes.

Helpful resources for Oak Ridge, Tennessee include the following.

Residential Building Code

Tennessee adopted a statewide mandatory residential code that will control; however, local governments are free to make laws more strict (with some limitations).See PLRB, Tennessee Building Codes for more information on state level codes.

Oak Ridge adopted the 2012 IRC, locally. Note that adoptions usually come with amendments. So, it is important to review those amendments in addition to the unamended model code.

You can find a copy of the model code here.

You can find information about amendments to the model code here.

Auto Search - beta:

Drip Edge

Drip Edge: no

Ice Barrier

Are ice barriers required for Oak Ridge ? No
Citation: §12-1102
Municipal Code https://www.mtas.tennessee.edu/system/files/codes/Oakridge_t12_0.pdf#page=48
Comments:

Table R301.2(1). Climatic and geographic design criteria.

Insert “10 PSF” in the table for Ground Snow Load.

Insert “90” in the table for Wind Speed.

Insert “C” in the table for Seismic Design Category.

Insert “Severe” in the table for Weathering.

Insert “12 inches” in the table for Frost Line Depth.

Insert “Moderate to heavy” in the chart for Termite.

Insert “19 degrees Fahrenheit” in the table for Winter Design Temp.

Insert “No” in the table for Ice Barrier Underlayment Required.

Insert “Anderson County, Tennessee and incorporated areas effective 01-17-07 and Roane County, Tennessee and incorporated areas effective 09-28-07” in the table for Flood Hazards.

Insert “250” in the table for Air Freezing Index.

Insert “60” in the table for Mean Annual Temp.

Comments

Section R313. Automatic fire sprinkler systems. Section R313 is hereby deleted in its entirety. Oak Ridge, TN Muni. Code § 12-1102.

Section R905.2.8.5. Drip edge is hereby deleted in its entirety. Oak Ridge, TN Muni. Code § 12-1102.

Commercial Building Code

Oak Ridge adopted the 2012 IBC, locally . Note that adoptions usually come with amendments. So, it is important to review those amendments in addition to the unamended model code.

You can find a copy of the code here.You can find information about amendments to the model code here.

Auto Search - beta:

Comments

Oak Ridge, TN has adopted the 2012 IBC including appendices  A, C, F, G, H and K. Oak Ridge, TN Muni. Code § 12-201.

For information regarding automatic sprinkler systems, see Oak Ridge, TN Muni. Code § 12-202.

Existing Buildings

Oak Ridge, TN did not adopt the IEBC, therefore Chapter 34 of the IBC would apply.

Other Building Codes

Oak RIdge, TN also adopted the following codes:

2012 International Fire Code. Oak Ridge, TN Muni. Codes § 7-101 (adoption) and § 7-104 (amendments).

2011 National Electrical Code. Oak Ridge, TN Muni. Code § 12-405 (adoption).

2012 International Plumbing Code. Oak Ridge, TN Muni. Codes § 12-705 (adoption) and § 12-706 (amendments).

2018 International Energy Conservation Code. Oak Ridge, TN Muni. Codes § 12-1201 (adoption) and § 12-1202 (amendments).

2012 International Mechanical Code. Oak Ridge, TN Muni. Codes § 12-1301 (adoption) and § 12-1302 (amendments).